Cangzhou Huayang Car Accessory Co.,Ltd.

News

Home News What Are the Installation Methods for Au...

What Are the Installation Methods for Automobile Seat Slides?

What Are the Installation Methods for Automobile Seat Slides?

The installation methods of automobile seat slides should be designed in combination with the vehicle body structure, seat functions and vehicle positioning, which are mainly divided into two systems: rigid fixed installation and flexible adaptive installation. The specific classifications and technical details are as follows:

Bolt Fastening Installation

This is the most mainstream installation method for passenger cars and commercial vehicles, which rigidly connects the slides to the vehicle body floor longitudinal beams or mounting brackets via bolts.
  • Installation Process: First, pre-fix the lower guide rail of the slide at the vehicle body mounting points. After adjusting the levelness and spacing, tighten it with high-strength bolts (usually grade 10.9 or above). For some vehicle models, lock washers or threadlockers are required to prevent loosening caused by vehicle jolting.
  • Structural Features: High connection strength and strong load-bearing capacity, suitable for high-frequency load-bearing scenarios such as front seats and commercial vehicle cab seats.
  • Applicable Scenarios: Mass-produced models including sedans, SUVs, heavy-duty trucks and buses, serving as the standard installation scheme for seat slides.

Welding Installation

This method adopts welding technology to directly fuse the lower guide rail of the slide with the vehicle body floor or mounting frame, which is a non-detachable fixed installation mode.
  • Installation Process: First, position the slide and fix it by spot welding, then complete full welding through arc welding or laser welding. After welding, anti-rust treatment and strength testing must be carried out.
  • Structural Features: The strongest connection rigidity and no risk of bolt loosening, but it is difficult to maintain and replace in the later stage.
  • Applicable Scenarios: Special vehicles (such as ambulances and fire trucks), racing cars and other scenarios with extremely high requirements for seat stability. This scheme is also adopted by some old commercial vehicles.

Snap-on Quick Installation

Developed for vehicle models with lightweight and modular design, this method realizes quick assembly and disassembly of slides through buckles and locking mechanisms.
  • Installation Process: Align the buckles on the lower guide rail of the slide with the mounting slots on the vehicle body, and press the locking button to complete the fixation; during disassembly, simply unlock the buckles to remove the slide.
  • Structural Features: High installation efficiency without the need for tools, suitable for the modular replacement needs of seats, but the load-bearing capacity is lower than that of the bolt fastening type.
  • Applicable Scenarios: Quick seat replacement schemes for shared cars and ride-hailing vehicles, as well as rear seat slides of some light-duty MPVs.

Bracket Adapter Installation

When the mounting points on the vehicle body floor do not match the mounting holes of the slides, a customized adapter bracket is used to realize transitional installation.
  • Installation Process: First, fix the adapter bracket at the vehicle body mounting points, then install the slide on the bracket. Adjust the height and horizontal angle of the slide through the bracket to adapt to different seat models.
  • Structural Features: High flexibility, compatible with the matching needs of slides of different brands and vehicle bodies, and is often used in modified cars and non-mass-produced vehicle models.
  • Applicable Scenarios: Seat upgrade projects in automobile modification factories and customized installation of special vehicles.

Suspension Installation

Specially designed for large-space vehicle models such as buses and vans, the slides are not directly installed on the floor, but suspended on the side wall or top frame of the carriage.
  • Installation Process: Weld or bolt the upper guide rail of the slide to the side wall bracket of the carriage, and connect the seat to the guide rail through a slider to realize lateral sliding or flip storage.
  • Structural Features: Save floor space, suitable for multi-seat layout in the passenger area of buses, and it is necessary to strengthen the suspension load-bearing structure of the guide rail.
  • Applicable Scenarios: Side seats of minibuses and buses, as well as folding seats of some RVs.

Vibration Damping and Buffering Installation

Aimed at bumpy scenarios such as off-road vehicles and construction machinery vehicles, vibration damping elements are added between the slides and the vehicle body, which belongs to a flexible installation method.
  • Installation Process: Install rubber vibration damping pads or spring shock absorbers between the lower guide rail of the slide and the vehicle body mounting points, then fix them with bolts, which can absorb vibration and impact during vehicle operation.
  • Structural Features: Improve seat comfort and reduce wear of slides caused by vibration, but it will sacrifice part of the connection rigidity.
  • Applicable Scenarios: Special engineering vehicles such as off-road vehicles, excavators and loaders.


Contact information:

Cangzhou Huayang Car Accessory Co.,Ltd.

WhatsApp/WeChat/Kakao talk/MB:+86 15030709203

Tel: +86 15030709203； +86 18733045230

QQ: 2761741790

Email: sales@hycaraccessory.com

           ceo@hycaraccessory.com

            sales@yiduspace.com

           2761741790@qq.com

Website:  www.hycaraccessory.com



Related News